CIC-510 is a DSP development system designed for learning DSP hardware implementations. The system combines both DSP chip for signal processing and FPGA chip for I/O control.
With various built-in I/Os and several implementation examples, ranging from basic DSP theory to advanced DSP applications, users are able to learn DSP implementations efficiently.

■  FPGA (EP4CE6) & DSP (F2812) I/O exchange

■  DSP (F2812)
    1. GPIO & CPU Timer and XINTF
        (1) GPIO Toggle
        (2) GPIO Loopback
        (3) Step Motor control using GPIO
        (4) CPU Timer
        (5) Step Motor control using GPIO and CPU-Timer (Full Step)
        (6) Step Motor control using GPIO and CPU-Timer (Half Step)
        (7) Show clock using CPU-Timer
        (8) Program code run from Xintf
        (9) Digital-to-Analog Converter (DAC)
      (10) Watchdog
    2. Event Processing
        (1) EV Timer Period
        (2) EV Timer PWM control
        (3) EV Timer DC motor PWM speed control
        (4) EV Timer DC motor micro step control
        (5) Single-phase sine wave PWM drive control
        (6) EV Timer Capture event
        (7) EV Timer Capture event with interrupt
        (8) Quadrature Encoder Pulse (QEP) measure
        (9) QEP position measure and control
    3. Serial Communication Interface (SCI)
        (1) SCI FIFO Digital Loop Back
        (2) SCI FIFO Digital Loop Back with interrupt
        (3) SCI Auto baudrate and transaction example
    4. Analog-to-Digital Converter (ADC)
        (1) ADC Sequential Mode
        (2) ADC Sequential Override Mode
        (3) ADC Sequential Mode with different sample time
    5. Serial Peripheral Interface (SPI)
        (1) SPI FIFO Digital Loop Back test
        (2) SPI FIFO Digital Loop Back test with interruption
        (3) SPI FIFO Digital Loop Back transfer to FPGA peripheral
    6. Enhanced Control Area Network (eCAN)
        (1) eCAN back-to-back transmission in SELF-TEST mode
        (2) eCAN back-to-back transmission test with UART command
    7. Multichannel Buffered Serial Port (McBSP)
        (1) McBSP FIFO Digital Loop Back test
        (2) McBSP FIFO Digital Loop Back test with interruption
        (3) McBSP FFR test with interruption
        (4) McBSP transfer with sine and ramp data

1. FPGA Cyclone IV EP4CE6 development board (144pin)
2. Program manager software for program download and In-System-Programming
3. Additional training content : DC motor, stepper motor, temperature and PLC I/O controls
4. I/O expanded socket included